Pitco-frialator PG14D Bedienungsanleitung

L80-045 Rev 0 (11/07)IMPORTANT FOR FUTURE REFERENCEPlease complete this information and retain theseinstructions for the life of the equipment:Model #

L80-045 Rev0 (11/07)1014. Apply the new manual fill option overlay (A6066901) to the new manualfill option bezel (B3615401-C). With a 3/8” wrench, rem

L80-045 Rev0 (11/07)11THIS PAGE LEFT INTENTIONALLY BLANK

L80-045 Rev0 (11/07)12In the event of problems with or questionsabout your order, please contact the PitcoFrialator factory at (800)258-3708 US andCan

L80-045 Rev0 (11/07)2Tool required to perform this upgrade:5/32” Allen Key 5/16” Socket, Nut Driver, or Wrench3/8” Wrench 1/2” Wrench3/4” Wrench 7/8”

L80-045 Rev0 (11/07)3Ensure kit is complete. Part number B8702901-CL.1. Qty.1 B3615401-C Bezel2. Qty.3 PP10911 Fitting3. Qty.1 A8017902-C Bracke

L80-045 Rev0 (11/07)415. Qty.1 L80045 Instruction ManualExploded Part view

L80-045 Rev0 (11/07)51. From the back, remove the eight 5/16” screws that hold the rear cover on.2. With the rear of the tank exposed, remove the fi

L80-045 Rev0 (11/07)64. Apply Teflon tape to the 90° compression fitting (PP10911) and install.Make sure the fitting is at the 3 o’clock position whe

L80-045 Rev0 (11/07)77. Apply Teflon tape to the rear fitting of the supply piping. Install thecheck valve (PP10726) onto the rear fitting of the sup

L80-045 Rev0 (11/07)89. From the front of the unit, remove the four Allen head screws with a5/32” Allen Key. Unplug the computer and set front panel

L80-045 Rev0 (11/07)911. Apply Teflon tape the NPT ends of the fitting bodies removed earlier.Assemble the fittings with fill valve (PP10945). Add th